Shanghai Shenda Dynamic Balancing Machine Manufacturing Co., Ltd.. 沪ICP备16012006号-1
Focus on Wechat Public Number
Add：Address: 8787 Hutai Road, Baoshan District, Shanghai (Shanghai Headquarters)
Axial flow fan special dynamic balancing machine The impeller design adopts aluminum alloy pressure casting, which is exquisite and beautiful in appearance and reliable in use. The aerodynamic design uses aeronautical technology, and the axial flow fan blades are airfoil type and forward-swept twisted blades with low noise and high efficiency.
Operating steps of balancing machine The operation steps of the dynamic balancing machine are as follows: 1. Cleaning work should be done before operation, especially in the journal, rollers, universal coupling and connection of the rotor. When installing the rotor, the impact between the rotor and the roller must be avoided. After installing the rotor, a little clean oil should be added to the journal and the roller. It is strictly forbidden to drive without connecting the rotor and the universal coupling. 2. Joints should be fitted with the dimensions of universal joint. Joints should be machined according to the specific conditions of the workpiece. Their shapes should be symmetrical, the weight should be lighter, the inner and outer circles of each gear should be concentric, the accuracy of the joint with the workpiece should be H6/h6, and the concave hole matching with the universal joint should also be H6/h6, and the same should be guaranteed. Heart, end face should be vertical to avoid affecting accuracy. 3. Adjust the distance between the two pendulums and tighten them to suit the distance between the bearings at both ends of the rotor. Refer to the scale on the roller rack according to the size of the rotor