搜索
ss
ss
新闻中心
News
-
-
The important role of balance machine in life

The important role of balance machine in life
Top

  • Categories:news
  • Author:
  • Origin:
  • Time of issue:2021-03-15 19:04
  • Views:

(Summary description)Nowadays, science and technology are developing rapidly. Machinery is very common in our daily life. The application of balancing machines is becoming more and more extensive, because it has a very important role. Here is an introduction to the role of balancing machines: any rotor of the balancing machine When rotating around its axis, centrifugal force is generated due to uneven mass distribution relative to the axis. This kind of unbalanced centrifugal force acting on the rotor bearing will cause vibration, generate noise and accelerate bearing wear, which will seriously affect the performance and life of the balancing machine. During the manufacturing process, rotating parts such as the main shaft of the machine tool of the balancing machine, the crankshaft of the internal combustion engine, the steam turbine rotor, the gyro rotor and the clock balance wheel need to pass through the balancing machine to run smoothly and normally. Correcting the unbalance of the rotor according to the data measured by the balancing machine can improve the mass distribution of the rotor relative to the axis, and reduce the vibration generated when the rotor rotates or the vibration force acting on the bearing to the allowable range. Therefore, the balancing machine is an indispensable equipment to reduce vibration, improve performance and improve quality. The requirement for workpiece imbalance exceeds the ability of the balancer itself to reach the minimum remaining imbalance, that is, the balance accuracy of the balancer cannot meet the requirements for workpiece balance. The roundness of the journal at its support is not good, and the surface roughness is too low. The rigidity of the balancer itself is not good, and it deforms during high-speed rotation and causes mass deviation, or the unfixed parts of the workpiece move or become loose in the rotating state.

The important role of balance machine in life
Top

Nowadays, science and technology are developing rapidly. Machinery is very common in our daily life. The application of balancing machines is becoming more and more extensive, because it has a very important role. Here is an introduction to the role of balancing machines: any rotor of the balancing machine When rotating around its axis, centrifugal force is generated due to uneven mass distribution relative to the axis.



This kind of unbalanced centrifugal force acting on the rotor bearing will cause vibration, generate noise and accelerate bearing wear, which will seriously affect the performance and life of the balancing machine. During the manufacturing process, rotating parts such as the main shaft of the machine tool of the balancing machine, the crankshaft of the internal combustion engine, the steam turbine rotor, the gyro rotor and the clock balance wheel need to pass through the balancing machine to run smoothly and normally.

Correcting the unbalance of the rotor according to the data measured by the balancing machine can improve the mass distribution of the rotor relative to the axis, and reduce the vibration generated when the rotor rotates or the vibration force acting on the bearing to the allowable range. Therefore, the balancing machine is an indispensable equipment to reduce vibration, improve performance and improve quality.

The requirement for workpiece imbalance exceeds the ability of the balancer itself to reach the minimum remaining imbalance, that is, the balance accuracy of the balancer cannot meet the requirements for workpiece balance. The roundness of the journal at its support is not good, and the surface roughness is too low. The rigidity of the balancer itself is not good, and it deforms during high-speed rotation and causes mass deviation, or the unfixed parts of the workpiece move or become loose in the rotating state.

  • Categories:news
  • Author:
  • Origin:
  • Time of issue:2021-03-15 19:04
  • Views:

Nowadays, science and technology are developing rapidly. Machinery is very common in our daily life. The application of balancing machines is becoming more and more extensive, because it has a very important role. Here is an introduction to the role of balancing machines: any rotor of the balancing machine When rotating around its axis, centrifugal force is generated due to uneven mass distribution relative to the axis.

This kind of unbalanced centrifugal force acting on the rotor bearing will cause vibration, generate noise and accelerate bearing wear, which will seriously affect the performance and life of the balancing machine. During the manufacturing process, rotating parts such as the main shaft of the machine tool of the balancing machine, the crankshaft of the internal combustion engine, the steam turbine rotor, the gyro rotor and the clock balance wheel need to pass through the balancing machine to run smoothly and normally.

Correcting the unbalance of the rotor according to the data measured by the balancing machine can improve the mass distribution of the rotor relative to the axis, and reduce the vibration generated when the rotor rotates or the vibration force acting on the bearing to the allowable range. Therefore, the balancing machine is an indispensable equipment to reduce vibration, improve performance and improve quality.

The requirement for workpiece imbalance exceeds the ability of the balancer itself to reach the minimum remaining imbalance, that is, the balance accuracy of the balancer cannot meet the requirements for workpiece balance. The roundness of the journal at its support is not good, and the surface roughness is too low. The rigidity of the balancer itself is not good, and it deforms during high-speed rotation and causes mass deviation, or the unfixed parts of the workpiece move or become loose in the rotating state.

相关资讯