中文版
English
Copyright © 2003-2019 Shanghai Shenke Dynamic Balancing Machine Manufacturing Co., Ltd All Rights Reserved 沪ICP备16012006号-4
24-hour service telephone：13585855377
搜索
Take you to appreciate the industry development of balancing machines
- Categories:news
- Author:
- Origin:
- Time of issue:2021-04-11 21:41
- Views:
Take you to appreciate the industry development of balancing machines
Balancing technology originated from the emergence of rotating bodies. With the emergence of high-speed steam turbines, engines, electric motors, centrifugal pumps, compressors, etc., it began to receive extensive attention and rapid development. With the continuous improvement of balance requirements, symmetrical design can no longer be fully achieved. For the performance requirements of the machine, in order to obtain better practical results in the professional roll cutter and roller calibration, it is necessary to perform high-precision Dynamic balance correction.
The balancing machines from 20 years ago are still in use today. Compared with modern machines, only a small part of the previous balancing machines are the same. Although generally speaking, the rotor is still mounted on the bearing in recent years, the driving method has not changed much, and the electronic technology is not very mature. In industry, only pure mechanical measurement is usually used.
In order to improve the sensitivity of the test and select the frequency, it is generally chosen to measure below the resonance frequency. This method is a very good and commonly used choice. Initially, the angle of the unbalance is determined based on empirical guesses, and this is also true in the plane separation of multi-plane calibration. In the following ten years, a variety of new methods and patented technologies appeared.
They are mainly used to perfect and improve the balance machine, develop various temporary new systems, balance correction, and improve the economic efficiency of the product and reduce the balance time as the development purpose. This principle is introduced into the design of the machine. Before electromechanical converters were widely adopted, most companies only put their energy into improving designs. After World War II, with the rapid development of electric F technology, it led to a revolutionary leap in balancing machines.
- Categories:news
- Author:
- Origin:
- Time of issue:2021-04-11 21:41
- Views:
Balancing technology originated from the emergence of rotating bodies. With the emergence of high-speed steam turbines, engines, electric motors, centrifugal pumps, compressors, etc., it began to receive extensive attention and rapid development. With the continuous improvement of balance requirements, symmetrical design can no longer be fully achieved. For the performance requirements of the machine, in order to obtain better practical results in the professional roll cutter and roller calibration, it is necessary to perform high-precision Dynamic balance correction.
The balancing machines from 20 years ago are still in use today. Compared with modern machines, only a small part of the previous balancing machines are the same. Although generally speaking, the rotor is still mounted on the bearing in recent years, the driving method has not changed much, and the electronic technology is not very mature. In industry, only pure mechanical measurement is usually used.
In order to improve the sensitivity of the test and select the frequency, it is generally chosen to measure below the resonance frequency. This method is a very good and commonly used choice. Initially, the angle of the unbalance is determined based on empirical guesses, and this is also true in the plane separation of multi-plane calibration. In the following ten years, a variety of new methods and patented technologies appeared.
They are mainly used to perfect and improve the balance machine, develop various temporary new systems, balance correction, and improve the economic efficiency of the product and reduce the balance time as the development purpose. This principle is introduced into the design of the machine. Before electromechanical converters were widely adopted, most companies only put their energy into improving designs. After World War II, with the rapid development of electric F technology, it led to a revolutionary leap in balancing machines.
